Hydraway 2000’s has been installed in 1000’s of homes nationwide. Hydraway’s unique patented design allows for high water “in-flow” to remove standing water. When compared to standard 4” perforated pipe, Hydraway has 70% increases for water inflow rates. This means it removes water extremely fast and resists clogging like a standard pipe system.

Learn More

Hydraway 300 is used as a “drain board”. It directs water to the Hydraway 2000 drainage system. Some of the applications that Hydraway 300 is used for is for is behind retaining walls, exterior basement foundation walls, bridge abutments, planters, synthetic roof tops under pavers. Its’ patented design offers a 27 gal/sq ft/min flow rating and compressive strength of over 19,000 PSF.

Learn More

Hydraway 2000 is the leading choice when it comes to Sports Field and Golf Course drainage. Hydraway 2000 is used on Synthetic and Natural turf applications. Hydraway’s unique patented design offers the highest compressive strengths at over 11,400 PSF and high “in-flow” rates is the reason why works so well. With over a 1000 successful installs from the Professional level to the local High School level, Hydraway is the choice when it comes to turf drainage.

Learn More

MDTI offers a wide variety of accessories to compliment the Hydraway Drainage Systems including moisture barriers, sump pumps,and moisture resistant wall panels. With no know failures, the Hydraway Drainage System(and it's numerous accessories) is your best option for water remediation and drainage.

Learn More

MDTI provides products and support to a vast dealer/installer network. To locate a dealer/installer near you for a residential or commercial project, click the link below.

Learn how you can become one of our Certified Dealer Installers and benefit from our time proven products and extensive training support.
Dealer/Installer support includes:

• Training and field supervision of certified installers
• Geotechnical engineering guidance
• Computer assisted design

Coming Soon!

Coming Soon!

A helical anchor/pile is a segmented deep foundation system with helical bearing plates welded to a central steel shaft. Load is transferred from the shaft to the soil through these bearing plates. Central steel shafts are available in either Type SS (Square Shaft) series or Type RS (Round Shaft) series. The Type SS series are available in 1-1/4" to 2-1/4" square sizes. The Type RS series are available in 2-7/8" to 4-1/2" diameter sizes. Type SS-RS combinations are also available for compression applications in soil conditions where dense/hard soils must be penetrated with softer/loose soils above the bearing strata. The Helical Pulldown® Micropile series is also used in applications similar to those requiring the use of the Type SS-RS combinations.